Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterNew Door Installation in Houston, TX
New garage door installation in Houston typically costs between $1,100 and $2,800 for a standard double door, including removal of the old unit, and most Fernbrook jobs are completed in a single day. We install doors on homes across Houston, and every quote is given in writing before any work starts. If you’re weighing a replacement against one more repair, call us at (361) 286-8321 and we’ll walk through the numbers with you honestly.
A new door is a different job from a repair, and it should be treated that way. The track has to be re-leveled, the springs sized to the exact weight of the new panel, the opener reprogrammed, and the balance checked until the door holds at mid-height without creeping. That’s what our Garage Door Installation in Houston work covers, and it’s what we’ve done since Fernbrook opened in 2002 as part of the Cedarwell family of independently owned and operated garage door businesses.
We’re not a chain, and we don’t run crews of contractors. Every Fernbrook technician is background-checked, uniformed, and trained on eight major brands, including Clopay, Amarr, and Wayne Dalton. The person who shows up at your door is the person who will do the work, clean up after it, and show you a photo of the finished job before they leave.
When You Need New Door Installation
A garage door can hold on for years past its best days, but there are moments when replacement is the calmer, smarter choice than another repair. Here’s what we typically see before a Houston homeowner decides it’s time:
- The door is more than 15 years old and the panels are sagging. Even with new springs, an older door with cracked panels or rusted stiles won’t balance the way it should, and it will keep pulling the opener out of alignment.
- A repair estimate is creeping past half the cost of a new door. If you’re spending $600 on a spring and another $400 on rollers and then looking at a panel replacement, we’ll tell you when a full replacement is the better use of your money. We’d rather you know before you spend.
- The door has storm or flood damage. Houston humidity and storms are hard on doors. Waterlogged panels, rusted hardware, or bent tracks from wind are usually beyond repair. In neighborhoods like Meyerland and Kingwood, we see this most after heavy rainfall seasons.
- You can hear the door from inside the house. A family with a nursery above the garage or a bedroom facing the driveway shouldn’t hear every open-and-close. A new door with nylon rollers and a properly isolated opener can dramatically cut that noise.
- The door no longer seals against the Houston heat. Gaps at the bottom or along the sides let cooled air out and bring garage heat in. If your garage feels like an oven by 10 a.m. in July, the door itself is often the problem.
- You’re selling the home and the old door looks it. A new garage door consistently ranks among the highest-return exterior improvements. It’s one of the first things a buyer sees from the street.
If any of these sound familiar, we can come out and tell you plainly whether the door has life left in it or whether it’s time. You’ll get a written price either way, and there’s no charge for the estimate. Call (361) 286-8321 to schedule a visit.
Our New Door Installation Process
We follow the same order of work on every new door installation, and we name it up front so you know what to expect from the moment the technician parks the truck.
- Measure and assess. We measure the opening width, height, side clearance, and headroom. Houston garages vary a lot, especially in older neighborhoods like the Heights or Montrose, and the wrong measurement is the most common reason a door doesn’t fit. We also check the condition of the existing track and opener to tell you what can stay and what should go.
- Written quote before any work. Once we know what’s needed, the technician writes out the full price: door, hardware, labor, haul-away, and tax. You approve it in writing. Nothing gets installed on a verbal estimate.
- Remove the old door and hardware. We take the old door down carefully, section by section, and manage the tension on the old springs before removal. High-tension springs are dangerous; this is not a step anyone should attempt without proper training and tools. We haul the old door away so you don’t have to deal with it.
- Install and level the new door. The new track goes up first, then the sections, then the springs sized to the exact weight of the door, then the cables and rollers. We level every section as we go and check the balance repeatedly. A properly balanced door will stay put at knee height without the opener holding it.
- Connect and calibrate the opener. If you’re keeping your existing opener, we re-set the travel limits and force settings so it matches the new door’s weight and height. Depending on the brand and its condition, we’ll tell you if it’s worth pairing a new door with the old opener or if a new opener makes more sense.
- Test, clean, and confirm with you. We run the door through multiple cycles, listen for noise, and watch the edges for gaps. Then we clean the work area, vacuum the floor if debris has fallen, and show you a photo of the finished job. Our C.A.R.E. values are the checklist: Clean up like it is our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, and Explain the price before the work.
New Door Installation Pricing in Houston
Houston pricing for a new door runs a little higher than smaller Texas markets because of the product mix most homeowners choose: insulated steel doors that hold up to the heat and humidity. Here’s how much garage door installation costs in 2026, with the usual variables broken out:
- Single-car garage door (8′ x 7′ or 9′ x 7′): $950 to $1,800 installed. Non-insulated steel is at the lower end; insulated steel or a basic carriage-house style lands mid-range.
- Double-car garage door (16′ x 7′): $1,400 to $2,800 installed. Insulated steel with basic window panels is the most common choice in Houston and tends to run $1,700 to $2,300.
- Custom or oversized doors (18′ wide, 8′ tall, or specialty materials): $2,500 to $5,000 plus. This covers extra-wide two-car openings, taller doors for SUVs or storage lifts, and wood or wood-look composite options.
- Old door removal and haul-away: Included in our quote, always. Some companies add $75 to $150 for this as a line item. We don’t.
- New opener paired with the door: $350 to $750 installed, depending on the model and whether you want a belt drive for quiet operation.
What changes the price most is the door’s thickness, insulation value, and any window or hardware upgrades. A basic non-insulated door on a single-car garage is a straightforward, lower-cost job. An insulated Clopay or Amarr door with windows, decorative hardware, and a belt-drive opener is a premium job, and the quote should reflect that honestly.
Every Fernbrook quote is written, itemized, and given to you before you approve anything. No surprise line items, no “we discovered X once we started” adjustments. If the door costs $1,950 installed, that’s the number on the paper, and that’s the number you pay. Call (361) 286-8321 for a free, no-pressure estimate at your home.
FAQs – New Door Installation
How long does new door installation take in Houston?
Most standard new door installations in Houston take four to six hours from arrival to final clean-up, and the vast majority are finished the same day. Custom or oversized doors can take a full day or require a second visit for final trim work. We’ll tell you the expected timeline when we give you the written quote, and it’s rare that the actual day runs longer than the estimate.
Can I keep my existing garage door opener with a new door?
Yes, in many cases you can keep your existing opener, especially if it’s less than eight years old and in good working condition. We’ll re-calibrate it to the new door’s weight and travel. If the opener is older or struggling, we’ll tell you honestly, but we won’t pressure you into replacing it. Call (361) 286-8321 and we can look at your current opener when we measure for the new door.
Is an insulated door worth the extra cost in Houston?
For most Houston homes, yes. An insulated door usually adds $300 to $600 to the cost of an installation, and it pays back in cooler garage temperatures, a quieter panel, and less strain on the opener. If your garage shares a wall with a bedroom or living space, the insulation difference is noticeable. For a detached garage used only for parking, a non-insulated door can be the right call.
Why do I need a professional when the springs are involved?
Garage door springs are under tension strong enough to cause serious injury if released incorrectly. We use properly rated winding bars, follow a specific sequence, and never put a new door on old springs that aren’t matched to its weight. Please don’t attempt spring removal or installation yourself, and call us at (361) 286-8321 for an exact quote. Estimates are free.
Do you install doors from Genie, Clopay, Amarr, and Wayne Dalton?
Yes. Our technicians are trained on all four of these brands, and we regularly install Clopay, Amarr, and Wayne Dalton doors in Houston garages. If you have a specific model in mind, we’ll give you a straight answer on availability and pricing. If you’re not sure what you want, we’ll show you samples and explain the differences in plain terms.
Written by Jesse Calder, Owner at Fernbrook Garage Doors Houston, serving Houston.